The Department of Sustainability and Environment regulates floor sanding South Australia to protect the environment and limit liability. The licensing process involves a variety of requirements, including demonstrating experience, expertise and regular training sessions. Here are a few tips for choosing a reputable floor sander. First, hire a professional. If you have any doubts about the quality of your sanded floors, you can contact an industry association in your area for assistance.
Floor sanding is the process of removing the topmost layers of flooring and making them flat and beautiful. The first cut is usually done using coarse-grit paper to remove old coatings and make the floor flat. Large sanders are typically used across the timber grain to create an even surface. You may also need to replace worm-eaten cores if you are selling your home, so make sure to inspect the floor thoroughly before attempting this process.
A professional floor sander will use multiple cuts to achieve a smooth finish. The first cut uses coarse-grit paper to remove old coatings and flat the floor. Medium-grit papers are used to remove prior coats of floor finish. To sand hard-to-reach edges, an edge floor sander is used. The first cut should be as smooth as possible to minimize dust.
After the sanding process, you will need to clean the floor with a cleaning agent. Generally, this step is the most challenging. The SEA inspector will inspect the worksite and the machines used. After the floor sanding South Australia process is complete, you’ll need to seal any holes with a filler. This step is a necessary preparation for your project. However, if you choose the wrong type of floor sander, you might face a fine.
Before the sanding process begins, you should remove anything that might be in the way. Be sure to remove all tacks, nails, and staples from walls and furniture. If the sanding is being done on walls, they must be painted first. You shouldn’t paint the walls unless they are finished. The final coat, however, should be applied to skirting boards. If you’re planning on removing the floor, you should contact a professional in the Adelaide region.
To prepare for floor sanding South Australia, you should remove any furniture, staples, and rugs. It is essential to have the area cleaned before the sanding process, as the contractor must have uninterrupted access to water and electricity. If you’re painting the walls, you should ensure that the walls are already painted before the sanding. Avoid paint on skirting boards until the final coat is completed.